Door pencil case

Case for sliding doorsPN-1 used to install a single sliding door (made of wood or similar materials), sliding into the wall, in other words for installation pencil caseslidinginterior door. The case for one sliding door is a rigid box with a sliding system integrated inside. Case for sliding doors it is installed in the opening during repair work at the stage of rough finishing, or at the very end of the repair (the main condition is at the level of the finished floor) and sheathed with gypsum board for subsequent finishing with fine building materials, such as wallpaper, paint or decorative plaster. A sliding door is installed in the pencil case at the very last stage of the repair, which allows not to spoil the door during the finishing work. Note that you can put a closer on the sliding door of the pencil case. One of the most important parameters. door pencil case- the ability to easily dismantle the door and replace the rollers. Door pencil case The ideal design for organizing the work of sliding doors in the room. Wall sliding door - This is an ideal design option for an apartment, house or office. Plus, significantly saving the area of ​​the room. The room area is saved due to the fact that the door in the open state, as well as in the process of opening and closing, does not use any additional area (except for the opening itself), and the previously not useful internal wall niche is used before. This is shown in the figure - in the closed position the door of the pencil case looks like a standard door, and in the open position the sliding door slides into the wall (pencil case).

The instruction is attached to the pencil case.

CASE PRICE from 9000 r WITH AN EXTENDABLE SYSTEM

DESIGN CHARACTERISTIC DOOR CASE:

• For doors high: 1900 mm - 3000 mm (standard 2000 and 2100 mm)
• For doors wide: 500-1500 mm (standard 600-900 mm)
• For doors thick: 35-75 mm (standard for doors 36-42 mm)
• For a door weighing: up to 120 kg
• Packaging (for height 2000): corrugated cardboard (210x25x15 cm), weight 30 kg
• Total wall thickness: 125 mm (with a drywall sheet 12.5 mm)
• Feature: removable rail
• CASE PRICE WITH MECHANISM: from 9 000 r

CASING KIT FOR SLIDING DOORS CONSISTS OF:

Box (pencil case)

• Box Material: plywood
• Appointment: upholstered with drywall
• Case Thickness: 100 mm (without GKL)
• Feature: sound absorbing
• Installation: in the opening in the wall

Top guide

• In a set: 1 PC
• Material: aluminum
• Appointment: for sliding rollers
• Installation: to the upper beam of the box (already installed)
• Feature: removable

Castors with mounting plate

• In a set: 2 pcs
• Material: zinc aluminum alloy
• Bearing: in each wheel 625 ZZ
• Appointment: door movement
• Feature: height adjustment
  

Stopper

• In a set: 2 pcs
• Material: plastic
• Feature: adjustment
• Appointment: door travel restriction
  
• Installation: along the edges of the upper guide

Explorer and lower bar

• In a set: 1 PC
• Material: aluminum
• Appointment: door rolling prevention
• Installation: at the bottom of the door
• Feature: with and without insert

• In a set: 1 PC
• Material: nylon
• Appointment: closes the gap, insulation
• Installation: framed
  
• Feature: plug-in
  

• In a set: 4 things
• Material: steel and plywood
• Appointment: convenient assembly and disassembly of the door
• Installation: after hanging the door
  
• Feature: trimmed with standard platband

This is all that is included in the standard pencil box for installing a sliding door. The price of a standard-size pencil case is from 9,000 rubles.

CASE OF THE NON-STANDARD SIZE WE WILL MANUFACTURE UNDER THE ORDER

To install the pencil case door, you will also need:

1. Materials: door leaf (of any manufacturer), sliding handle, a set of standard platbands and extensions (as for a swing door)
2. Consumables: polyurethane foam, liquid nails, masking tape
3. Tools: screwdriver, hammer, construction level

DIMENSIONS OF CASES AND OPENINGS FOR INSTALLING THE CONSTRUCTION (dimensions are given for standard cases):

DOOR HEIGHT 2000-3000 mm Pencil Heightdoor height + 90 mm Installation opening heightdoor height + 105 mm Opening height after door installationdoor height - 20 mm DOOR WIDTH (mm) 600mm 700mm 800mm 900mm 1000mm Case Width1315 mm1515 mm1715 mm1915 mm2115 mm Width of mounting hole1330 mm1530 mm1730 mm1930 mm2130 mm Opening width after door installation530-585 mm630-685 mm730-785 mm830-885 mm930-985 mm Case Thickness100 mm Plasterboard Thickness125 mm

If you didn’t find the required size in the table, download the detail size by installation

PRICE FOR CASES FOR SLIDING DOORS:

In order to buy a case for a sliding door You need to contact the sales team by phone or use the feedback form. We also sell cases for sliding doors in bulk. Wholesale prices that will pleasantly surprise you - check in the sales department.

width 901-1200 + 10%

width 1201-1500 + 25%

We make pencil cases under doors with a width of up to 1500 mm and a height of up to 3000 mm - for a different size, contact the manager

VIDEO CASE FOR A SLIDING DOOR:

SUMMING UP THE INSTALLATION OF CASES FOR SLIDING DOORS IN THE WALL:

Such doors closing to the wallcan be installed using our sliding pencil case design. Any door pencil case It will save your space, give convenience during operation, surprise your guests with its elegance and simply serve you for a long time and faithfully. Door pencil case Suitable for installation in any room - home, apartment, office.

1. The ability to install the door leaf of any manufacturer

2. Sliding door pencil case is installed without bottom floor guide

3. On the sliding door of the pencil case, you can install a handle with a lock for locking

4. The accessories of the pencil case are serviced (due to the removable rail)

5. Easy to assemble and install!

DOWNLOAD CASES FOR SLIDING DOORS:

ADDITIONAL TO CASES FOR SLIDING DOORS:

The lineup:

In the manufacture of this sliding system, the use of paintings of the following collections is possible:

• Sofia Original: All models.
• Sofia Classic: All models.
• Sofia Bridge: Models 71, 72, 73, 75
• Sofia Light: All Models
• Sofia Master and Margarita: All models
• Sofia Infinity: All Models

Mounting Features

In preparation for installation, it is important to consider the size of the installation opening, some of which will be sewn up after installation. The cartridge case is set to the height of the clean floor. For fastening the cartridge case, it is important to provide mortgages on the sides of the case and on top. The upper mortgage should be well fixed and exclude the possibility of displacement or deflection, since it is to it that the guide profile will be fastened, which holds the bulk of the moved web.

Hidden sliding door options:

Single wing sliding doors

Double Sliding Doors

Sliding door pencil case. The ratio of the size of paintings and openings

Corresponding table of the sizes of door leafs and openings for a sliding door (rounded sizes of structures are given)

1 leaf

2 wings

Calculation of the mounting opening of the pencil case unit

Use the level to check the verticality of the walls. With minimal deviations from the plane and the absence of narrowing of the opening, it is enough to add a pencil case to the dimensions of the block block across a width of 20 mm and a height of 10 mm.

The maximum web size for this system: 1000x2300 (except for web 07).

Sliding interior doors pencil case from the factory Sofia - a great choice for your home.

Pencil case design requirements

To create sliding door cases, you should install a niche into which the door leaf should move. The requirements for the manufacture of these structures are different. The wall, if it is not a carrier, can be dismantled. At the place where it was located, a wall partition is re-installed, providing a niche for the door of the pencil case. The partition is called false walls.

The door case itself should be a partition. At the same time, the area of ​​the room is preserved, but the wall thickness does not increase. If for some reason it is impossible to dismantle the load-bearing wall, then it will be necessary to attach a frame of wood or metal to it, which must be sheathed with drywall.

How to install a pencil case for a sliding door

You can make a purchase of sliding interior doors, the pencil case of which is ready for installation, in the store. These types of products are massive. They are expensive, so self-assembly of a pencil case will cost 2 times cheaper.

Correct installation of a case for a sliding door is possible with special knowledge.

It is best to start installation work with floor leveling. The cassette is erected when the problem of the final floor is solved. Here it is necessary to determine not only the thickness of the floor covering, but also the substrate.

To perform the work, the presence of the canvas, as well as such accessories as:

• pens,
• locking mechanism
• platbands, extras,
• galvanized steel profile,
• fasteners
• a set of sliding mechanism having a guide.

Of the tools required:

• hammer drill
• screwdriver
• building level,
• pencil,
• roulette.

Before performing work, measurements must be taken. In this case, the guide of the required length corresponding to the doubled length of the web should be measured. Next, profiles are marked and cut.

When constructing a false wall, you will need to complete 2 rows of profiles. If an overlay was made from the frame, then 1 row of material is collected for the existing wall. The steel profile must be fixed to the wall, ceiling and floor. Niche doors should be wider
20 mm canvases. At the same time, the depth of the niche is usually 1/2 the width of the canvas. The stock should be about 4-8 cm.

Since the operation of the structure should not cause hum and vibration, then when installing the racks, you should use wooden bars. In order for the movement of the canvas to be silent, it will be necessary when fixing the frame to the ceiling and floor to make a layer of rubber or technical cork. Next, install the sliding mechanism and hanging the door leaf.

The gap between the sash and the floor should remain no more than 5-6 mm. In this case, the sound insulation of the door is improved. The course of the blade should be adjusted to exclude the possibility of friction of the sash against the door frame. This must be done before sheathing, since after working with drywall it will no longer be possible to adjust the canvas. Next, the door frame is sheathed with plasterboard and plastered, walls are trimmed and platbands are installed.

Recommendations for installing a pencil case door

If the frame is made of an inexpensive thin profile having a thickness of up to 0.5 mm, it should be strengthened with the help of bars. Otherwise, the partition will begin to vibrate due to movement of the web, which may cause the guide to sag.

To prevent distortion and violation of the vertical location of the jambs, during installation, you will need to temporarily fix the doorway with a screed.

For its independent manufacture, a steel profile or bar is used. Installation of the door structure requires accurate determination of the width of the pencil case.

If a fairly narrow door is installed in a niche, the canvas will begin to cling to the frame, and the presence of too wide gaps can impair the appearance of the product and reduce its heat-insulating properties. An open canvas should not go into a niche completely, otherwise it will be difficult to close it, which will require the use of additional devices.

It is very important to determine the extreme position. Installation of the door-case is carried out on a finished, perfectly flat floor surface. It is necessary to take into account all the nuances of the technology of mounting the pencil case before its sheathing. After completing all the work, it will be impossible to change anything, otherwise you will have to disassemble the frame wall again.